Skip Navigation LinksHome>DOWNLOADS>Software

MPS AND CMS SOFTWARE

To download applicable software for our SETPOINT Machinery Protection System (MPS) and Condition Monitoring System (CMS), use the links in the table below.  Only the most recent version of all software is available for download here.  If you require information regarding previous versions of the software, please contact our Technical Support Team

Operating System Compatibility:
Windows 7 Professional w/ Service Pack 1 (32-bit* and 64-bit)
Windows 8 Professional (32-bit and 64-bit)
Windows 10 Professional (32-bit and 64-bit)
Windows Server 2008 (64-bit)
Windows Server 2012 (64-bit)

* NOTE: 32-bit versions of Windows 7 may require an updated USB driver for proper communications between SETPOINT MPS software and SETPOINT racks.  See below for updated driver download.

Windows XP compatiblity: Microsoft no longer supports Windows XP as of 8 April 2014.  Consequently, all SETPOINT software versions released after 1 Jan 2014 have not been tested on, and will not be supported for, Windows XP. For additional information, refer to Microsoft's Windows XP end of support statement.

 


MPS Software
Version / Date
Language File
Type
File
Size
Notes
5.0.1227.0
(7/1/2017)
English .ZIP  26MB
  • Requires Microsoft .NET Framework 4.0 or later.  The web install version of .NET is included in our SETPOINT Setup & Maintenance Software installer package.  The installer will first check to see if .NET is already installed on the computer, and if not, download it from the Microsoft website and install it before the Setup & Maintenance Software installation process proceeds.  The computer must be connected to the internet during the installation process unless .NET is already present on it. If this is not possible, download the offline install version of .NET from the Microsoft website.  This will allow .NET to be installed on computers without an internet connection.  Then, install SETPOINT Setup & Maintenance Software on the computer(s).  The install package will automatically detect that .NET is already installed, and the rest of the Setup & Maintenance installation will continue normally.  

NOTE: The differences between the web install and offline install versions are detailed on the Microsoft page accessed via the link above. 

  • This download installs three separate applications known collectively as SETPOINT Setup & Maintenance Software.  It consists of the following:

    • SETPOINT Rack Setup - used to configure a SETPOINT rack
    • SETPOINT Rack Maintenance - used to upgrade firmware, perform rack diagnostics, and other rack maintenance tasks
    • Simulator Launcher - used to emulate the touchscreen display when a physical rack is not connected; primarily intended for demonstration and training purposes
5.0.1231.0
(7/1/2017)
Russian .ZIP 26MB  
Supplemental Windows 7 (32-bit) USB Driver
Version / Date
Language File Type File Size Notes
2.08.30 All .ZIP 3MB
  • USB drivers are included in the SETPOINT MPS software installation file.  They support a USB cable connection between a computer running SETOINT MPS software and UMM and/or TMM modules in a SETPOINT rack.  This supplemental driver is only required when running SETPOINT MPS software on 32-bit Windows 7 operating systems. 
CMS Display Software
Version / Date
Language File Type File Size Notes
4.0.1212.0
(7/1/2017)
English  .ZIP 28MB
  • This download is for CMS Display software.  CMS Display can be used to connect to a PI Server where SETPOINT vibration data is stored. It can also be used to open and view an archive file (.CMS file extension). To open an archive file, no additional software is required. To connect to a PI Server, additional OSIsoft PI System components must be installed (see below).
  • Connection to a PI Server hosting CMS data requires that the computer running CMS Display also has OSIsoft's PI AF Client (version 2.X or later) installed.  The installation process for CMS Display will automatically detect the presence of PI AF Client.  If present, the user will be able to connect to a PI Server.  If not present, the user will only be able to open and view CMS data archives (.CMS file format).  PI AF Client is not available for download from this website.  You must obtain it directly from OSIsoft.  Alternatively, you may contact SETPOINT Technical Support to obtain the installation file and corresponding instructions.
  • Data accessible by CMS Display software is stored in the OSIsoft PI System.  PI Server, PI AF Server, and additional OSIsoft components used in the PI System are supplied separately and not downloadable via this website.  For assistance, contact our Technical Support Team.
     
  • Refer to the CMS Operation & Maintenance Manual for additional information on installing and using the software.
4.1.1293.0
(8/14/2017)
English .ZIP 28MB
  • This is a BETA release of v4.1 software and will be production released in the Nov 2017 timeframe after additional enhancements are made.  For current production-released software (v4.0.1212.0), use the link above.
4.0.1231.0
(7/1/2017)
Russian .ZIP 28MB  
SETPOINT-to-PI Adapter Software
Version / Date
Language File Type File Size Notes
4.0.1227.0 (7/1/2017) English .ZIP 8MB
  • This application enables communications between one or more SETPOINT racks and a PI Server. The computer running this adapter is normally a PI Server but the software may alternatively reside on a separate computer in the PI Server's network.
     
  • The computer running SETPOINT-to-PI Adapter must also have OSIsoft's PI AF Client (version 2.X or later) installed.  The installation process will automatically detect the presence of PI AF Client and prompt the user accordingly.  PI AF Client is not available for download from this website.  You must obtain it directly from OSIsoft.  Alternatively, you may contact SETPOINT Technical Support to obtain the installation file and corresponding instructions. 
     
  • PI Server, PI AF Server, Microsoft SQL, and additional OSIsoft components used in the PI System are supplied separately and not downloadable via this website.  For assistance, contact our SETPOINT Technical Support Team.
     
  • Refer to CMS Operation & Maintenance Manual for additional details.  You may also contact our Technical Support Team.
4.0.1231.0 (7/1/2017) Russian .ZIP 8MB